Din Type Fuse

L&T Din Type Fuse/HF Type


Feature:

  • HF 2- 63 A

  • High Breaking Capacity about 80 kA

  • Unique Offering that is 63 A Cylindrical Fuse

  • Fuse blown Indication 

  • Low rat through Energy

  • Low Watt lose leading to Power Saving

  • Suitable Fuse base and fuse pulling handle 

  • Current rating 125 A



Shop Online At : https://autocon.biz/Electrical/Switchgear/Fuselinks/Din-Type-Fuse-Link-Type-HN-125A-Size-00

Capacitor Duty Contactor

C&S Capacitor Duty Contactor

Feature :
  • Excellent damping of In-rush Current
  • Reduce Watt-loss during "On" Condition which saves Energy
  • Capacitor Bank Switching in parallel without DE-rating
  • Enhanced Equipment Life
  • Power Quality Improvement 
  • Optimized Solution Cost
  • Short but high peak Current Pole Closing 
  • 10 kVAR Ratings 


Application :
  • Specially design to meet straight requirement of Capacitor Switching.

Shop Online At : https://autocon.biz/Electrical-Contactor/Capacitor-Duty-Contactor-10kVAR-1NO-1NC
 

Disconnector Fuse

L&T Switch Dis-connector  Fuse 


Feature :

  • Compact Design Save Space

  • Electrodynamics Compensation

  • Quad break contact system

  • Full AC-23 A rating for complete range

  • Highest Fuse Short Circuit Facility

  • Quick make/Quick Break/Positive Break

  • Clear On/Off Indicator

  • Current carrying zone

  • High Clearance and Cree pages

  • Se-prate Bridge for each Pole

  • Maximum Ground Clearance 

  • Phase Barrier and Terminal Shroud as a Slandered Accessories 

  • Fuse Stationary and Isolated from both sides

  • Direct Access to Mounting and Terminal Screws 

  • Generous Terminal Capacity 

  • Replaceable contacts for enhanced life 

  • Suitable for vertical and horizontal orientation 

  • Wide range of Spares and Accessories 


Application :

  • Industrial Purpose

  • Used in panels 


Shop Online At : https://autocon.biz/Electrical/Switchgear/Switch-Disconnector-Fuse

RCCB

L&T RCCB : Manufactured by L&T


Feature :

  • RCCB are available DP and FP version from 25A to 100A ratings 
  • Available withh 30 mA , 100 mA and 300 mA sensitivity
  • Truly current operated-operation even at nominal voltage
  • Operates in core balance current transformers (CBCT) principle
  • Operation even in case of neutral failure
  • Advance natural mechanism
  • Protection against the occurrence of electrically ignited fires  


Application :

  • The achievement of increased safety in all wiring installation
  • Supply areas where the installation rules prescribes the use of residual current operated protective devices.
  • Individual Installation by mean of mounting kit or insulating housing.


Available Model :

  • Double Pole : 25 A to 100 A ratings and 30 , 100 & 300 mA sensitivity
  • Four pole : 25 A to 100 A ratings and 30 , 100 & 300 mA sensitivity














Buy online Athttps://autocon.biz/Electrical/Switchgear/RCCB

MCB

Miniature Circuit Breaker (MCB) : Manufactured by C&S


Feature :

  • Large terminal screws 
  • Finger proof terminals
  • Air circulation Channel
  • Breaking Capacity 10 kA
  • Padlocking facility
  • Integrated label channel holder
  • Combination head appositive screw
  • Two stage easy stepping devise for din rail mounting
  • Bi-connection terminals for cable and busbar
  • Lightning and distribution with no surge current


Application :

  • Can be used in systems up to  250/440 v AC , 60 V DC per pole



Buy Online At https://autocon.biz/Electrical/Switchgear/MCB



MCCB

Moulded Case Circuit Breakers (MCCB) : Manufacture by L&T


Feature :


  • Range : 20 A to 630 A
  • Breaking Capacity : 25kA/36kA/50kA/70kA
  • Microprocessor & thermal magnetic based based protection releases
  • Motor breakup protection available
  • Distributors & SD(isolators) versions available
  • Adjustable overload setting 
  • Manual , Rotary and Motorized version are available 
  • Wide range of snap fit external and internal accessories 


Application :

  • The range of MCCB is specially design for tropical condition , ensuring reliable performance at high ambient and humid environment.
  • The range can satisfied the most demanding system requirements.



Buy Online At : https://autocon.biz/Electrical/Switchgear/Module-current-circuit-breaker




Explusion Fuse

Expulsion Fuse Element


Feature :

  • Dual Sensing and Dual Fuse Link 
  • Current Sensing
  • Dual Sensing and Dual Element type of Fuse
  • The tail Length is varied to suit the Dimension of different ratings
  • Button Head Link

Application :

  • Suitable for Oil Immersed Service 

  • Used with Single and Three Phase Pad-mounted Transformer

  • Design to Protect Hi-voltage Distribution System in the event of an internal transformer fault

  • Always used in Series with another Interrupting Devise capable of   interrupting current below Fuses minimum interrupting Current 

  • General Purpose of using Fuses is to protect Feeder and Component such as Transformer 

 



Shop Online At : https://autocon.biz/Electrical/High-Tension-Electricals/Fuse-Element

Two Pole Structure

M S Two Pole Structure : Manufactured by National


Feature :

  • Two Pole Structure of Beam 200 X 100 X 9 Mtr - Two Nos

  • Channel 100 X 50 X 3.5 Mtr - 7 Nos 

  • Base Plates

  • Clamps 

  • Nut Bolts

  • Bus Bar Dimensions 

  • Earthing arrangement is being provided

  • Easy Accessibility and Maintenance 

  • The Cross Arms Shall be of MS Channel

     

     


 

View Online At : https://autocon.biz/High-Tension-Electricals/M-S-2-Pole-Structure.

Rubber Sheet

Rubber Sheet 


Feature :

  • Square Anti-Slip Rubber mat

  • Fine Finish 

  • High Strength

  • Durable 

  • Best Quality

  • Made from high-grad Rubber Material and Advance Machinery

 

Feature :

  • Widely used in Factory Workplace and Restorent

  • Some House Hold Application


Available Range :

  • 10 mm Size to 25 mm


Shop Online At : https://autocon.biz/High-Tension-Electricals/Rubber-Sheet-ISI-With-TC-6mm

ACSR

ACSR Conductor 

 

Feature :

  • ACSR is a Concentric-lay-Stander-ed  Conductor consisting of Single Core Wire with one or more layers of 1350 H19 Stander-ed  Aluminum Wires 

  • Steel Core Wires are Protected from Corrosion by Galvanizing Aluminum-dad alloy 

  • Stander-ed , High , Extra and Ultra High Strength Steel are also Available

  • High Tensile Strength

  • Batter Sag Properties

  • Economic Design 


Application : 

  • Mainly used overhead Transmission Line and Overhead Transmission Line

  • Used in Application which demands Current Carrying Capacity






Shop Online At : https://autocon.biz/High-Tension-Electricals/ACSR-Conductor

Relay

Thermal Overload Relay : Manufactured by C&S


Feature :

  • Microprocessor Technology with Self-Supervision

  • Two sets of Parameters

  • Operating Hour Meter

  • Definite time for under current Protection

  • Select able IMT trip Characteristics

  • Single Step Earth Fault Supervision

  • CB Failure Protection

  • Blocking of Individual Protective Elements

  • The Protective Function Can freely allocated to Output Relay

  • Rack Mounting with Self-active Shot-Circuit Mechanism

  • Possibility of Serial Data Exchange


Application :

  • Offers Reliable Protection For LV and MV Motors which may either operated via Power Contractors or via Power Circuit Breaker 

 

Available Range :

  • Input Power - 5 Hp to 80 HP

  • Input Current - 4 Amp to 800 Amp

  • Relay Range - 0.63Amp to 120 Amp









Sop Online At : https://autocon.biz/index.php?route=product/search&search=thermal%20overload%20relay


Break Switch

Load Break Switch


Feature :

  • Load Break Switch 22Kv

  • Load Break Switch 630Amp/1250Amp , 26.3KA

  • Ht HRC Fuses of Suitable Ratings

  • The Insulation Level is 12Kv/28Kv/85Kv

  • Inbuilt Auxiliary Switch

  • In Built Earth and Fuse trip

  • In Built Shunt Trip Coil

  • Tamper Proof


Application :

  • Design to provide Making or Breaking of Currents

  • Increases the Operating Speed of the disconnected switch Blade 

  • Allow the Safe Interruption of the arc resulting

  • Disconnected switch can be supplied with Equipment to provide a limited load switching capacity

     

 






Shop Online At : https://autocon.biz/High-Tension-Electricals/Load-Break-Switch-22kV

MPCB

MPCB : Manufactured by BCH


Feature :


  • Conforms to IEC 60947
  • Perfect coordinate system for motor control
  • Electrical life : 100000 operation
  • Excellent current limiting characteristic
  • Modular snap fit accessories
  • 2 Pole Version 
  • Only magnetic trip version only available on request 


Available Model :


  • 0.1 Amp to 25 Amp Thermal and Magnetic Re-leas 



















Buy Online At :https://autocon.biz/Electrical/Switchgear